Faculty Publications | Best Engineering College in Dehradun, Uttarakhand | Tula's Institute
Preaload Image

Choose The Tula's Experience

International Journal Publications

Publication Year: 2020

  1. Shubham Negi,  Poornima Mittal, Brijesh Kumar, “An In-depth Analysis of Structures,  Materials, Models, Parameters and Applications for Organic Light Emitting Diodes“, Journal of Electronic Material, pp. 1-27, DOI1007/s 11664-020-08178-8, 2020.(SCI Journal, Impact Factor: 1.676)
  2. Shakti Singh, Surbhi Bagherwal, Sunil Semwal, Manoj Badoni, “Design and Development of Standalone Solar Photovoltaic Battery System with Adaptive Sliding Mode Controller”, International Journal of Renewable Energy Research (IJRER), vol.10, issue 1, p.p. 243-150 (Scopus Indexed)
  3. Vivek Bhatt, Sandeep Khantwal, Rahul Negi & Manoj Joshi , Design of Chebyshev higher order filter using OTRA”, International Journal of Recent Technology and Engineering , ISSN:  2277-3878, vol. 8, issue-5, January 2020, p.p.2163- 2167
  4. Mishra, A.K. Pandey, Ali J. Chamkha, Manoj Kumar, “Roles of
    nanoparticles and heat generation/absorption on MHD flow of Ag–H 2 O
    nanofluid via porous stretching/shrinking convergent/divergent
    channel”
    , Journal of the Egyptian Mathematical Society, 2020; 1-18.

International Conference Publications

Publication Year: 2020

  1. Diwaker Pant, Sanjeev Naithani, Sunil Semwal and Renu Thapliyal, “ Rain Attenuation a Bottleneck Issue for Next Generation of Internet and Communication Technology”, 14th Uttarakhand State Science and Technology Congress 2019-20, UCOST, Vigyan Dham, Dehradun, 27-29 Feb. 2020.(Paper Presented at the Congress)
  2. Diwaker Pant, P.S. Chauhan, S.K. Soni, Sanjeev Naithani, “Channel Capacity Analysis of Wireless System under ORA scheme over kappa − μ/Inverse Gamma and eta− μ/ Inverse Gamma Composite Fading Models”, International Conference in Electrical and Electronics Engineering (ICEEE 2020), at Madan Mohan Malviya University of Technology, Gorakhpur, 14th– 15th February, 2020. ( Presented)
  3. S. Chauhan, Sandeep Kumar, S. K. Soni, V. K. Upaddhaya , & Diwaker Pant, “Average Channel Capacity over Mixture Gamma Distribution”, International Conference in Electrical and Electronics Engineering (ICEEE 2020), at Madan Mohan Malviya University of Technology, Gorakhpur, 14th– 15th February, 2020. ( Presented)
  4. Sandeep Chand Kumain, Raj Singh, Kamal Kumar “A  Land Use Land Cover Classification Model Using Deep CNN ” ,  International Conference on Innovative Engineering Design – 2020(ICOIED-2020).  ( Presented)

Publication Year: 2019

  1. Agrawal and S. Johari, “A Survey on Content Based Crawling for Deep and Surface Web”, 2019 Fifth International Conference on Image Information Processing (ICIIP), Shimla, India, 2019, pp. 491-496, doi: 10.1109/ICIIP47207.2019.8985906.
  2. Semwal, M. Badoni and N. Saxena, “Smart Meters for Domestic Consumers: Innovative Methods for Identifying Appliances using NIALM,” 2019 Women Institute of Technology Conference on Electrical and Computer Engineering (WITCON ECE), Dehradun Uttarakhand, India, 2019, pp. 81-90. doi: 10.1109/WITCONECE48374.2019.9092936

 

International Journal Publications

Publication Year: 2019

  1. Sunil Semwal, R. S. Prasad, Munendra Singh, Group control and identification of residential appliance using Non-intrusive method”, Turk J Elec Eng & Comp Sci, SCI-E indexed (Impact Factor: 0.68), accepted , in press. DOI: 10.3906/elk-1404-59.

  2. Munendra Singh, Sunil Semwal, Ashavani Kumar, Shailendra Singh, Impedance modelling for classification of flavoured green teas”, Turk J Elec Eng & Comp Sci, SCI-E indexed (Impact Factor: 0.68), accepted , in press. DOI: 10.3906/elk-1306-253.

  3. D. Pant, P. S. Chauhan, S. K. Soni, Error Probability and Channel Capacity Analysis of Wireless System over Inverse Gamma Shadowed Fading Channel with Selection Diversity”, Int J Commun Syst. 2019; e4083. (SCI).

  4. P. S. Chauhan, V. Rana, S. Kumar, S. K. Soni, D. Pant, “Performance Analysis of Wireless Communication system over Non-identical Cascaded Generalized Gamma Fading Channels”, Int J Commun Syst. 2019; e4004. (SCI).

  5. S. Negi, P. Mittal, B. Kumar, P. K. Juneja, “Organic LED based light sensor for detection of ovarian cancer”, Microelectronic Engineering, vol. 218, 2019, (https://doi.org/10.1016/j.mee.2019.111154), (SCI, I. F. 1.654).

  6. S. Negi, P. Mittal, B. Kumar, “Analytical Modelling and Parameters Extraction of Multilayered OLED”, IET Circuits, Devices and Systems, 2019 (DOI:  10.1049/iet-cds.2019.0164), (SCI, I. F. 1.277).

  7. S. Negi, P. Mittal, B. Kumar, “Characteristic Performance of OLED Based on Hole Injection, Transport and Blocking Layers”, Recent Patents on Engineering, vol. 13 (4), 2019, (DOI : 10.2174/1872212113666190409151647) (SCOPUS Indexed).

  8. Vivek Bhatt, Sandeep Khantwal, Rahul Negi , “Design of Bessel high order all pass filter based on an OTRA” in International Journal Of Recent Technology and Engineering , ISSN: 2277-3878, Volume-8, Issue-4, Nov 2019, Page no: 242-244. (ELSEVIER SCOPUS)

  9. Sandeep Khantwal, Rohit Gupta, “64 bit ripple carry adder using boosted CMOS differential logic”, Global Journal Of Engineering Science And Researches, Vol. 6, 7 July 2019, ISSN 2348-8034, UGC Thomson Reuters indexed.

  10. Sandeep Khantwal, Rohit Gupta, “Low voltage boosted CMOS drivers for various applications”, Global Journal Of Engineering Science And Researches, Vol. 6, 7 July 2019, ISSN 2348-8034, UGC Thomson Reuters indexed.

  11. Rohit Gupta, Sandeep Khantwal, “Piezoelectric using vibration energy harvesting used as supply power to electronic devices”, Global Journal Of Engineering Science And Researches, Vol. 6, 7 July 2019, ISSN 2348-8034, UGC Thomson Reuters indexed.

  12. Ajay Chhillar, Sandeep Khantwal,Fuzzy logic approach of depth control of submarine”, Global Journal Of Engineering Science And Researches, Vol. 6, 7 July 2019, ISSN 2348-8034, UGC Thomson Reuters indexed.

  13. Viswajeet Chaudhary “Heat transfer characteristics through plate pin heat sink with dimples”, Int. Journal of Applied Engineering Research, 14(9):126-132

  14. Anamika Bhandari “Design and Vibration Characteristics Analysis of Quadcopter Body Frame”. International Journal of Applied Engineering Research, ISSN 0973-4562 Volume 14, Number 9, 2019.

  15. Ankit Saxena, Swapnesh Tatreh, “Various Techniques Used for Emotion Detection from Speech”, Journal of Emerging Technologies and Innovative Research (JETIR), May 2019,p 7 -10, Volume 6, Issue, (ISSN-2349-5162)

  16. Sakshi koli, Ram narayan , “Review Paper On Sentiment Analysis Technique by Different Machine Learning Approach “International Journal of Computer Sciences and Engineering , ISSN NO: 2347-2693 VOL.7 in 2019 (ICI /UGC Approved ).

  17. Mr. Ramnarayan, Ms. Nikita, Ms. Vasundhara “A Review on Edge detection Technique “Canny Edge Detection”, in International Journal of Computer Applications, 178. 28-30.10.5120/ijca2019, 918828. 2019

  18. Kumar, A., Johari, S., Proch, D. et al. A Tree Based Approach for Data Pre-processing and Pattern Matching for Accident Mapping on Road Networks. Proc. Natl. Acad. Sci., India, Sect. A Phys. Sci. 89, 453–466 (2019) doi:10.1007/s40010-018-0495-5. (e-SCI).

  19. Archit Priyadarshi, Deepak Kumar Singh and Ashish Kumar Chaudhury, “Soil Stabilization from Dredged Soil of Dal Lake, Srinagar using Lime for Pavement Design” International Journal of Engineering Research & Technology, Volume 8 Issue 04, April-2019 pp. 392-396.

  20. Archit Priyadarshi, Ashish Kumar Chaudhury and Deepak Kumar Singh, “Soil Stabilization from Dredged Soil of Dal Lake, Srinagar using Pond Ash for Pavement Design” International Journal of Engineering Research & Technology, Volume 8 Issue 04, April-2019 pp. 397-401.

  21. Rawat Sk, Mishra A, Kumar M. Numerical Study Of Thermal Radiation And Suction Effects On Copper And Silver Water Nanofluids Past A Vertical Riga Plate. Multidiscipline Modeling In Materials and Structures. 2019 Jul 1;15(4):714-36.

  22. Mishra A, Kumar M. Viscous Dissipation And Joule Heating Influences Past A Stretching Sheet In A Porous Medium With Thermal Radiation Saturated By Silver–Water And Copper–Water Nanofluids. Special Topics & Reviews In Porous Media: An International Journal. 2019; 10(2).

  23. Mishra A, Kumar M. Ohmic–Viscous Dissipation And Heat Generation/Absorption Effects On Mhd Nanofluid Flow Over A Stretching Cylinder With Suction/Injection. Inadvanced Computing And Communication Technologies 2019 (Pp. 45-55). Springer, Singapore.

  24. Mishra A, Kumar M. Influence of Viscous Dissipation and Heat Generation/Absorption On Ag-Water Nanofluid Flow Over A Riga Plate With Suction. International Journal Of Fluid Mechanics Research. 2019;46(2).

  25. Mishra A, Pandey Ak, Kumar M. Velocity, Thermal and Concentration Slip Effects On Mhd Silver-Water Nanofluid Past A Permeable Cone With Suction/Injection And Viscous-Ohmic Dissipation. Heat Transfer Research.

  26. Kandwal S, Mishra A, Kumar M. Numerical Investigation of Nanofluid Heat Transfer In An Inclined Stretching Cylinder Under The Influence Of Suction/Injection And Viscous Dissipation. Nanoscience and Technology: An International Journal. 2019;10(1).

  27. Kandwal Sk, Mishra A, Kumar M. Impact Of Chemical Reaction On Ag-Water Nanofluid Flow And Heat Transfer Due To An Inclined Stretching Cylinder. Srms Journal Of Mathematical Sciences. 2019 Mar 26;4(1):20-36.

  28. Mishra A, Pandey Ak, Kumar M. Numerical Investigation Of Heat Transfer Of Mhd Nanofluid Over A Vertical Cone Due To Viscous-Ohmic Dissipation And Slip Boundary Conditions. Nanoscience And Technology: An International Journal. 2019;10(2).

  29. Monika Bangari & Diksha Panwar (2019)“A Structural equation modeling on analysis of preference advertisement in building brand equity”. International journal of innovative technology and exploring engineering. (SCOPUS INDEXED) Nov-2019 Vol.9 Issue 1.

  30. Monika Bangari & Diksha Panwar (2019) “Determinants of profitable niche of affiliate marketing in Amazon.com” Pacific business review .2019 Vol.11 Issue 12.

  31. Monika Bangari & Diksha Panwar (2019) Artificial intelligence in the quick service restaurants: An exploration of opportunities and challenges. International journal of research and analytical reviews2019vol. 6 Issue 1.

  32. AbuBakr Mohammed, Sanjeev Kumar, S.P. Singh, “Software Development Methodology: A Determining Factor for Implementing MIS and E-Learning in Educational Institutes”. International Journal of Scientific Research and Review.

  33. Md. Salim Ahmad, Sanjeev kumar, S.P. Singh, “Effectiveness of Cloud Computing in the Context of Data Storage and Management in Organization and SMEs”. International Journal of Scientific Research and Review.

  1. Sakshi koli, Ram narayan ,“Review Paper on Sentiment Analysis Technique by Different Machine Learning Approach” International Journal of Computer Sciences and Engineering, ISSN NO: 2347-2693 VOL.7 in 2019(ICI /UGC Approved ).

  2. Preeti, Monika Belwal. “Energy Efficient LEACH and improved LEACH: A Review”. International Journal of Advanced Research in Computer science. Vol. 10 (3), ISBN/ISSN: 0976-5697

  3. Sandeep Chand Kumain, Kamal Kumar “Noise identification and classification by using deep convolutional neural network”. Malaysian Journal of Computer Science (Scopus Indexed – Communicated).

  4. Sandeep Chand Kumain, Kamal Kumar “Quantifying salt and pepper noise using deep CNN”. Journal of the Institution of Engineers (India): Series B (IEIB) (Scopus Indexed – Communicated).

  5. Nautiyal, P., Rajput, R., Pandey, D. et al. 2019. Role of glomalin in soil carbon storage and its variation across land uses in temperate Himalayan regime. Biocatalysis and Agriculture Biotechnology Sep 2019 vol 21. https://doi.org/10.1016/j.bcab.2019.101311

  6. Raj Singh* and Arun P. Mishra (2019). Physico-Chemical Characteristics of Asan Wetland with Reference to Avian and Molluscan Diversity, Doon Valley (Uttarakhand), India, International Research Journal of Environmental Sciences (IRJEvS), Vol. 8(3), 1-11, July (2019), ISSN 2319–1414.

Publication Year: 2018

  1. S. Negi, P. Mittal, B. Kumar, “Impact of different layers on performance of OLED”, Microsystem Technologies, vol. 24, issue 12, pp. 4981-4989, 2018, (https://doi.org/10.1007/ s00542-018-3918-y) (SCI, I. F. 1.513).

  2. S. Barthwal, S. Negi, V. Chamoli, A. Vidyarthi, “Navigating Satellite: -A Review”, International Journal of Research, vol. 7, issue VII, pp. 671-674, 2018, (Other Indexed).

  3. V. Chamoli, S. Negi, K. Kukreti, A. Kandwal, “Video Processing Applications Using IR(Infrared) Image Sequence”, International Journal of Research, vol. 7, issue VII, pp. 768-771, 2018, (Other Indexed).

  4. R. Ahmed, R. Rathi, S. Negi, and V. Panwar, “LOW Power 7 Bit Encoder using Pseudo Dynamic CMOS Logics” International Journal of Research, vol. 7, issue VII, pp. 648-652, 2018, (Other Indexed).

  5. A. Kharola, P. Dhuliya, P. Sharma, “Anti swing and Position control of single wheeled inverted pendulum Robot (SWIPR)”, International Journal of Applied Evolutionary Computation (IJAEC) 9 (4), 37-47, 2018.

  6. Vivek Bhatt, Sushant Shekar, “Simulation of Higher order All Pass Filter Using OTRAInternational Journal of Research and Scientific Innovation (IJRSI), ISSN 2321–2705, Vol. V, Issue VII, July 2018.

  7. Vivek Bhatt, Sushant Shekar, “Simulation of Higher order All Pass Filter Using OTRAInternational Journal of Research and Scientific Innovation (IJRSI), ISSN 2321–2705, Vol. V, Issue VII, July 2018.

  8. Rashmi Dhaundiyal, “An Advance Paper Generator using Fuzzy Logic” – A novel approach, International Journal of Computer Applications (IJCA), 2018

  9. Rashmi Dhaundiyal ,Nafeez Akhtar , Ankita Tyagi “A study on importance of power electronics based drives and renewable energy sources and their consumption” International Journal of Research in Applied Science & Engineering Technology (IJRASET), 2018

  10. Ashwani Kharola, Dr Pravin Patil (2018). “Fuzzy adaptive application for control of Single Wheel Mobile Robot (SWMR)”, Journal of Graphic Era University, 6(1): 135-152. ISSN: 09751416.

  11. Ashwani Kharola, Ravindra Mamgain, Ankit Jain (2018). “Artificial Neural Network (ANN) based novel Performance evaluation technique”. PM World Journal, 7(3):1-12, ISSN: 2330-4480.

  12. Ashwani Kharola, Yadnyesh Nikam, Hitesh Patil (2018). “A Review of Literature to aid in Management and Forecasting of Technology: A case of Petrol Engine”. PM World Journal, 7(5):1-5, ISSN:2330-4480

  13. Rahul Kumar, Ashwani Kharola, Ravindra Mamgain (2018). “Enhancement of Thermohydraulic performance of Tube Heat Exchanger with perforated Conical ring inserts”. International Journal of Multidisciplinary Research and Publications, 1(1):5-10, ISSN:25816187

  14. Ashwani Kharola, Piyush Dhuliya, Priyanka Sharma (2018). “Anti-swing and Position Control of Single wheel Inverted Pendulum Robot (SWIPR)”, International Journal of Applied Evolutionary Computation, 9(4):1-21, DOI: 10.4018/IJAEC.2018100103.

  15. Ashwani Kharola (2018) “Artificial neural networks based approach for predicting LVDT output characteristics”. International Journal of Engineering and Manufacturing (IJEM), 4(1):21-18, DOI: 10.5815/ijem.2018.04.03

  16. Vishwajeet Chaudhary “Experimental Investigation Of enhanced performance of pin fin heat sink with wings”, Applied Thermal Engineering, 155:546-562

  17. Rahul Kumar. “Enhancement of thermo-hydraulic performance of tube heat exchanger with perforated conical rings inserts”. International Journal of Multidisciplinary Research and Publications. 1(2):1-10

  18. Anamika Bhandari “Finite Element Analysis Based Material Optimization Of a Quadcopter Body Frame”, International Journal of Mechanical & Production Engineering Research And Development , Volume 8, Issue 7, October 2018,1342-1347,ISSN 2249- 6890.

  19. Mishra A, Pandey Ak, Kumar M. Ohmic-Viscous Dissipation And Slip Effects On Nanofluid Flow Over A Stretching Cylinder With Suction/Injection. Nanoscience and Technology: An International Journal. 2018; 9(2).

  20. Monika Bangari & D.S.Chaubey (2018) Convergence of motives of higher education: A Study on aspiring students in India. Journal of entrepreneurship and education.JEE (SCOPUS INDEXED) 2018 vol.21 Issue 1.

  21. Priya Sharma  (2018) “Effect of Satisfaction Level on Stress (With reference to Banking Sector)”International Journal of Management studies ISSN: 2249-0302 (Volume-V, Issue-2(2)  April-2018.

  22. Anupam Nautiyal (2018) “Changing face of India: Its impact on multinational corporation brand building” Asian Journal of Research in Business Economics and Management. Science Domain ISSN: 2249-7307 VOL-8 JAN.

  23. Km. Amrita, Neha Gupta, Rashmi Mishra, “An Overview of Cryptanalysis on AES” IJARSE (International Journal of Advanced Research in Science and Engineering) ISSN: 2319-8354, Volume 07, Special Issue 01, April 2018.

  24. Shivani Yadav, Km. Kaveri, Rashmi Mishra, “E-Commerce & Web Services: A review” IJARSE (International Journal of Advanced Research in Science and Engineering) ISSN: 2319-8354, Volume 07, Special Issue 01, April 2018.

  25. Rajput, R., Pokhriya, P., Panwar, P. et al. 2018. Soil nutrients, microbial biomass, and crop response to organic amendments in rice cropping system in the Shiwaliks of Indian Himalayas. Int J Recycl Org Waste Agricult (2018). https://doi.org/10.1007/s40093-018-0230-x.

  26. Khushbu, Mahendra Bairwa, Vijay Bahadur, Manisha K Rolaniya and U Jayvanth Kumar. 2018. Study on changes in organoleptic quality of value added blended herbal Ready-to-serve (RTS) of aonla (Emblica officinalis Garetn.) CV. NA-6 during storage period. Journal of Pharmacognosy and Phytochemistry 2018; SP1: 708-711.

  1. Manisha Kumari Rolaniya, Mahendra bairwa, Khushbu and S Sarvanan. 2018. Effect of Plant Growth Regulators (IIA, IBA, GA3) on Rooting of Hardwood Cutting of Grape (Vitis venifera L.) cv.Thompson Seedless. 2018. Journal of Pharmacognosy and Phytochemistry 2018; SP1: 398-400.

Publication Year: 2017

  1. Ritu Juneja, Sandeep Khantwal, Rohit Gupta, “32 bit ripple carry adders using CMOS differential logic”, International Journal Of Engineering Sciences & Research Technology, ISSN 2277-9655, Vol. 5, 4 APR 2017, UGC Thomson Reuters indexed.

  2. Rohit Kumar Gupta, Sandeep Khantwal, Ajay Chhillar, “DC-DC Boost Converter Using Adaptive Sliding Mode Control”, International Journal Of Engineering Sciences & Research Technology, ISSN 2277-9655, Vol. 5, 4 APR 2017, UGC Thomson Reuters indexed.

  3. Sandeep Khantwal, Rohit Gupta, Ritu Juneja, “Overview Of Boosted CMOS Differential Logic And Its Applications”, International Journal Of Engineering Sciences & Research Technology, ISSN 2277-9655, Vol. 5, 4 APR 2017, UGC Thomson Reuters indexed.

  4. Rohit Kumar Gupta, Sandeep Khantwal, Ajay Chhillar, “DC-DC Buck Converter Using Sliding Mode Control With Load of Constant Power”, International Journal Of Engineering Sciences & Research Technology, ISSN 2277-9655, Vol. 5, 4 APR 2017, UGC Thomson Reuters indexed.

  5. Ajay Chhillar, Rohit Kumar Gupta, Sandeep Khantwal,MPPT using Fuzzy logic control” , International Journal Of Engineering Sciences & Research Technology, ISSN 2277-9655, Vol. 5, 4 APR 2017, UGC Thomson Reuters indexed.

  6. Ajay Chhillar, Rohit Kumar Gupta, Sandeep Khantwal,MPPT using Type 2 Fuzzy logic control”, International Journal Of Engineering Sciences & Research Technology, ISSN 2277-9655, Vol. 5, 4 APR 2017, UGC Thomson Reuters indexed.

  7. Sandeep Khantwal, Ritu Juneja, “Ripple carry adders using low voltage boosted CMOS drivers”, International Journal Of Engineering Sciences & Management, ISSN 2277-5528, 2017, UGC Thomson Reuters indexed.

  8. Ritu Juneja, Sandeep Khantwal, “High performance FIR filter using boosted CMOS differential logic style”, Global Journal Of Engineering Science And Researches, ISSN-2348-8034, 2017, UGC Thomson Reuters indexed IEEE Conference.

  9. Ashwani Kharola, Dr Pravin Patil (2017). “Automated Control and Optimisation of Overhead Cranes”. International Journal of Manufacturing, Material and Mechanical Engineering (IJMMME), 7(3):41-68, IGI Global Publishers, DOI:10.4018/IJMMME.2017070103.

  10. Ashwani Kharola, Dr Pravin Patil (2017). “Soft computing based adaptive error optimisation for control of nonlinear system.” International Journal of Energy Optimisation and Engineering (IJEOE), 6(3):78-96. DOI:10.4018/IJEOE.2017070104.

  11. Ashwani Kharola, Dr Pravin Patil (2017) “Dynamic Stabilisation of One Wheel Mobile Robot (OWMR): A Soft-Computing Approach”, Journal of Industrial and Production Engineering (JIPE), 34(6):477-485. DOI:10.1080/21681015.2017.1360404.

  12. Ashwani Kharola, Dr Pravin Patil (2017). “Position and Tilt control of Two-Wheeled Robot (TWR): A Neuro-fuzzy approach”. International Journal of System Dynamic Application (IJSDA), 6(4): 17-33. DOI: 10.4018/IJSDA.2017100102.

  13. Ashwani Kharola, Dr Pravin Patil (2017). “Control dynamics and simulation of inclined Cart and Pendulum System”, International Journal of Advanced Evolutionary Computation (IJAEC), 8(2): 73-89, DOI: 10.4018/IJAEC.2017040105.

  14. Monika Bangari & D.S.Chaubey (2017) Exploring indicators for branding higher educational institutions in India. Journal of entrepreneurship and education .JEE (SCOPUS INDEXED) 2017 vol.20 Issue 2.

  15. Monika Bangari & Diksha Panwar (2017) The role of modified logo in creating brand extension : A semiotic study of whirlpool logo.( International journal of trade and global business perspectives (Print) 2319-9059,Issn(ONLINE)2319-9067,Volume.6 July to September 2017)

  16. Soniya Jain (2017) Innovative defects in trigonometric functions by applying TQM. Issn 2456 – 2831.

  17. Sandeep Garg, Sanjeev kumar. “Modeling of Supply Chain Management using Multi Agent Collaboration Engine and Reduction in Bullwhip Effects.”. International Peer Reviewed Open Access Journal.

  18. Abubakar Mohammed, Sanjeev Kumar. “Building a Framework for Developing MIS and E-Learning Integration in Education System”. International Journal of Advance Research in Science and Engineering.

  19. Abubakar Mohammed, Sanjeev Kumar. “Development Agenda Good Governance using MIS and E-Learning Platforms in Developing” International Multidisciplinary Journal

  20. Mr. Jagdamb behari Srivastava, Sanjeev kumar. “Article of Content-Based Image Retrieval Using Digital Image Database” International Journal of Innovative Research in Science, Engineering and Technology.

  1. Salim Ahmad, Sanjeev kumar. “Cloud Computing-A New ERA of Information Technology: Opportunities and Challenges” International Journal of Science Technology and Management

  2. Sandeep Kumar, Sanjeev Kumar. “Online analytical processing (OLAP) Performance appraisal using Map-Reduce and APARQL techniques in big data” International Journal of Research and Engineering

  3. Sonia vatta, Sanjeev kumar. “Review of Computer-Aided Learning System (Research Article)” Journal of Technology Advances and Science Research

  4. Sonia vatta, Sanjeev kumar. “Analytical Study of Computer-Aided Learning Systems” VSRD International Journal of Computer Science & Information Technology

  5. Monika Belwal, Sanjay Kumar. “A Priority based Round Robin CPU Scheduling Algorithm”. International Journal of Computer Science and Information Technologies. Vol. 8 (4), ISBN/ISSN: 0975-9646.

  6. Richa Rajput, Kusum Arunachalam, A. Arunachalam. 2017 Role of crop residue management practices on soil microbial dynamics of soil – Review in Indian Journal of Hill Farming, June 2017 vol 30;1 pg 6.

Publication Year: 2016

  1. Ashwani Kharola, Dr Pravin Patil (2016). “A PID Basd ANFIS Control of Inverted Pendulum on an Inclined Plane (IPIP)”. Nonlinear Studies, 24(1):101-111. ISSN:2153-4373

  2. Ashwani Kharola, Dr Pravin Patil (2016). “Neural Fuzzy Control of Ball And Beam System, International Journal of Energy optimisation and Engineering (IJEOE)”, 6(2): 64-78, IGI Global Publishers, Hershey, Pennsylvania (USA). DOI:10.4018/IJEOE.2017040104

  3. Ashwani Kharola (2016). “Design of a Hybrid Adaptive Neuro Fuzzy Inference System (ANFIS) Controller for Position and Angle control of Inverted Pendulum (IP) Systems”. International Journal of Fuzzy System Applications (IJFSA), 5(1):27-42, IGI Global Publishers, Hershey, Pennsylvania (USA). DOI:10.4018/IJFSA.2016010102.

  4. Ashwani Kharola (2016). “A PID based ANFIS & Fuzzy Control of Inverted Pendulum on Inclined Plane (IPIP)”, International Journal on Smart Sensing and Intelligent Systems, 9(2):616636. ISSN: 1178-5608.

  5. Ashwani Kharola, Dr Pravin Patil (2016). “A Comparative Study for Position regulation and Anti-swing control of highly non-linear Double Inverted Pendulum (DIP) system using different Soft computing techniques”. International Journal of Fuzzy Systems Applications (IJFSA), 6(2):59-81, IGI Global Publishers, Hershey, Pennsylvania (USA). DOI:10.4018/IJFSA.2017040104.

  6. Ashwani Kharola, Musheer Ahmad Ansarie, Punit Namdeo (2016). “Leadership Evaluation: A Fuzzy logic based proposed approach”, PM World Journal, 5(3):1-10, ISSN:2330-4480

  7. Ashwani Kharola, Dr Pravin Patil, Suyashi Raiwani (2016). “A Comparison Study for Control and Stabilisation of Inverted Pendulum on Inclined Surface using PID and Fuzzy Controllers”. Perspectives in Sciences, 8:187-190, Elsevier. DOI:10.1016/j.pisc.2016.03.016.

  8. Ashwani Kharola, Dr Pravin Patil (2016). “A Novel hybrid control of Flexible Inverted Pendulum (FIP) using Soft-computing approaches” Pertanika Journal of Science & Technology, 25(4):1189-1202. ISSN: 0128-7680.

  9. Ashwani Kharola, Dr Pravin Patil (2016). “Ball and beam system control using PID based ANFIS controllers”. International Journal of Advanced Mechatronic System (IJAMECHS), 7(1): 24-34. DOI:10.1504/IJAMECHS.2016.079649.

  10. Ashwani Kharola, Dr Pravin Patil (2016). “Mathematical Modeling and Performance Comparison of Overhead Cranes using Soft-Computing Techniques”, International Journal of Mechatronics, Electrical and Computer Technology (IJMEC), 7(3):3188-3200. DOI:649123/10.225110

  11. Ashwani Kharola (2016). Position Regulation and Anti-Swing Control of Overhead Gantry Inverted Pendulum (GIP) using different Soft-computing Techniques. International Journal of Intelligent systems and applications (IJISA), 8(2):28-34, DOI:10.5815/ijisa.2016.02.06.

  12. Ashwani Kharola, Dr Pravin Patil (2016). “Soft-computing control of Ball and beam system”. International Journal of Applied Evolutionary Computation (IJAEC), 9(4):1-21, DOI: 10.4018/IJAEC.2018100101

  13. Mr Tushar Gupta. “Determination and Reduction of Casting Cavity Befalling in CFF Filled Epoxy Based Hybrid Biocomposites”. SciFed Materials Research Letters. 1 (2):1-6

  14. Mr Tushar Gupta “Application and Properties of Chicken Feather Fiber (CFF) a Livestock” Waste in Composite Material Development. 5(1):13-24

  15. Anamika Bhandari “Effect of Fiber Loading & Walnut Filler on Mechanical Properties of Sisal-Kevlar Hybrid Epoxy Composite”, International Journal of Scientific & Engineering Research, Volume 7, Issue 12, December-2016,249 ISSN 2229-5518.

  16. S.K. Agrawal, Rakesh Gupta, Ramnath Panwar, “Multipulse AC-DC Converters For Power Quality Improvement In Vector-Controlled Induction Motor Drive”, IUP Journal of Electrical & Electronics Engineering (IUPJEEE), Vol. IX, No. 1, January 2016, pp. 57-68.

  17. Vishant Kumar et al,” An Intelligent Hand Gesture Recognition System Using the Principle of PCA”International Journal of Research in computer and communication Technology, Vol 6, Issue- 4, April- 2017, ISSN (Online) 2278- 5841,ISSN (Print) 2320 – 5156

  18. Suman Pant, Dr. Yashwant S. Chauhan, “Complex Dynamics for Sierpinski Curve using Jungck Ishikawa Orbit”, International Journal of Control Theory and Applications (IJCTA), Vol.10, Number 30 ,2017. (Scopus indexed and UGC list journal (UGC S. No.16612))

  19. Suman Pant, Dr. Yashwant S. Chauhan, Dr. Priti Dimri ,“Analytical, Numerical Treatment and Complex Dynamics of Jungck Ishikawa Iteration Scheme Using Different Functions”, International Journal of Control Theory and Applications(IJCTA), Vol.10 ,Number 33,2017. (Scopus indexed and UGC list journal(UGC S. No.16612))

  20. Rajput G, Pandey IP, Joshi HC. Synthesis of carbamoylethyl Cassia angustifolia seed gum in an aqueous medium. Carbohydrate polymers. 2016 Jan 20;136: 1259-64.

  21. Monika Bangari (2016) Digital Marketing and its Effects on Consumer Decision Making Process.(International journal of research in computer application and management ISSN 2231-1009 Volume .no 6 (2016), Issue no.04 April)

  22. Monika Bangari (2016)Advertising ethics and surrogate advertising practices: An empirical study (International journal of research in computer application and management ISSN 0976-2183 Volume .no 7 (2016), Issue no.04 April).

  23. Nitesh M. sureja, Vedvyas dwivedi, Sanjeev kumar. “CS-DTSP: A Model for Dynamic Travelling Salesman (DTSP) Problem” CIIT, International Journal of Artificial Intelligent Systems and Machine Learning.

  24. Harshita Rai, Pradheed M., Sanjeev Kumar. “A Novel Approach to balance the load between nodes of distributed computing”. International Journal of Research and Engineering.

Publication Year 2015

  1. Ashwani Kharola, Dr Pravin Patil (2015). “Stabilization and Control of Elastic Inverted Pendulum System (EIPS) using Robust Adaptive ANFIS controller”. International Journal of Fuzzy System Applications (IJFSA), 6(4):21-32, IGI Global Publishers, Hershey, Pennsylvania (USA). DOI:10.4018/IJFSA.2017100102.

  2. Swathi Rao G., Manipriya Singh, Ramnath Panwar, “Image Database Classification Using Neural Network With Gabor Filter And CBIR Technique”, International Journal of Scientific and Research Publications (IJSRP), Vol. 5, Issue 8, August 2015, e-ISSN 2250-3153.

  3. Johari, S., Sehgal, V.K. Master-based routing algorithm and communication-based cluster topology for 2D NoC. J Supercomput 71, 4260–4286 (2015) doi:10.1007/s11227-015-1521-x. (SCI).

  4. Neha Mishra, Ritu Joshi, Vibhor Sharma, Sachin Kumar, “A young discipline-Deep mind”, IJAER, vol. 4, 2015.

  5. Sachin Kumar, Garima Pant, Vibhor Sharma, Pooja Bisht, “Nanotechnology in computers”, IJAER, vol. 4, 2015.

  6. Ashwani Parashar, Ankit Saxena, Dr. Swapnesh Tatreh”Bespoke Timers in Improved Transmission Control Protocol Model “, MATRIX Academic International Online Journal of Engineering and Technology, p24-28, April 2015, Vol 3 Issue 1, ISSN 2348–3326 .

  7. Ashwani Kharola (2015). “Analysis of various Machining parameters of Electrical Discharge Machining (EDM) on Hard Steels using Copper and Aluminum Electrodes”. International Journal of Engineering and Manufacturing (IJEM), 5(1):1-14, DOI:10.5815/ijem.2015.01.01

  8. Ashwani Kharola (2015). “A Fuzzy Logic model for determining adhesive strength of thin films”. Annals of Faculty Engineering-International Journal of Engineering, 13(1):217-221, ISSN:1584-2673

  9. Ashwani Kharola (2015). “Comparative Study of Machining parameters on Die-Sinking Electrical Discharge Machining (EDM) using Copper and Aluminium Electrodes on Hard Steels”. International Journal of Metal Forming and Machining Processes (IJMFMP), 3(1):22-44, DOI:10.4018/IJMFMP.2016010103

  10. Ashwani Kharola (2015). “A Comparative analysis of Fuzzy based Hybrid ANFIS Controller for Stabilization and Control of Non-linear Systems”. International Journal of Soft Computing, Mathematics and Control (IJSCMC), 4(4):13-23, ISSN:2201-4160

  11. Ashwani Kharola, Swarnima Kunwar, Gopa B Choudhury (2015). “Students Performance Evaluation: A fuzzy logic reasoning approach”. PM World Journal, 4(9):1-11, ISSN:2330-4480

  12. Ashwani Kharola (2015). “A Hybrid ANFIS Technique For Effective Performance Evaluation”. PM World Journal, 4(11):1-9, ISSN:2330-4480

  13. Ashwani Kharola (2015). “Anti-swing and Position control of Double Inverted Pendulum (DIP) on Cart using hybrid Neuro-Fuzzy controllers”. International Journal of Information Technology and Computer Science (IJITCS), 8(7):16-21, DOI:10.5815.ijitcs.2016.07.03

  14. Ankit Jain. “Parametric Effect on Bed Temperature of PCM Packed Bed Latent Heat Storage System”. International Journal of Engineering Research & Technology (IJERT). 4(9): 339-343

  15. Ankit Jain. “Parametric effect on Stratification Coefficient of PCM-Packed Bed Latent Heat Storage System”. International Journal of Scientific & Engineering Research. 8(7):1-12

  16. Anurag Bahuguna. “Effect of rake angles and material properties on chip formation: A Review”. International Journal of Engineering Science and Innovative Technology. 3(6):526-530

  17. Anurag Bahuguna. “Study About Engine Operated By Compressed Air (C.A.E): A Pneumatic Power Source”. IOSR Journal of Mechanical and Civil Engineering. 11(6):99-103.

  18. Rajput G, Pandey IP, Joshi G. Carboxymethylation of Cassia angustifolia seed gum: Synthesis and rheological study. Carbohydrate polymers. 2015 Mar 6; 117:494-500.

  19. Rajput G, Pandey IP, Joshi G, Bisht SS. Cyanoethylation of Cassia angustifolia seed gum in aqueous medium. Journal of the Indian Academy of Wood Science. 2015 Jun 1; 12 (1):1-8.

  20. Monika Bangari & D.S.Chaubey (2015) Product positioning through advertisement : A study of lic products.( ZENITH International Journal of Business Economics & Management Research .ISSN 2249- 8826.

  21. Ashutosh Sharma (2015) “Crime against Women & its impact on Indian Economy” IOSR Journal Of Humanities And Social Science (IOSR-JHSS) Volume 20, Issue 2, Ver. III (Feb. 2015), PP 51-55 e-ISSN: 2279-0837, p-ISSN: 2279-0845.

  22. Nitesh M. sureja, Vedvyas dwivedi, Sanjeev kumar “MASA-DTSP: An Improved Model for Dynamic Traveling Salesman (DTSP) Problem” Citi International journal of Artificial intelligent Systems and Machine learning.

  23. Nitesh M. sureja, Vedvyas dwivedi, Sanjeev kumar. “EAS-DTSP: An Improved ANT System Model for Dynamic Traveling Salesman (DTSP) Problem” Ciit International Journal of Artificial Intelligent Systems and Machine Learning.

Publication Year: 2014

  1. Sunil Semwal, R. S. Prasad, P. Juneja, “Identifying Appliances using NIALM with Minimum Features”, International Journal of Electrical and Computer Engineering (IJECE) 4.6 (2014). Scopus indexed.

  2. Diwaker Pant, Akhilesh Verma, Piyush Dhuliya, “Propagation Model for Tree Blockage in Mobile Communication Systems using Uniform Theory of Diffractions”, International Journal of Electrical and Electronics Engineering (IJEEE), Vol.1, Issue 5 , October, 2014, e-ISSN: 1694-2310, p-ISSN: 1694-2426, pp. 9-12. (Google Scholar).

  3. Sandeep Gotam, Izhar Ahmed, Vishal Ramola, Rajeev Kumar, “A New design of 1-bit full adder based on XOR-XNOR gate”, International Journal of Enhanced Research in Science Technology & Engineering” ISSN: 2319-7463, Vol. 3, Issue 6, June-2014, pp: 81-85.

  4. Ashwani Kharola (2014). “A Fuzzy Risk Assessment Model (FRAM) for Risk Management (RM)” Project and Program Management Journal, 3(39): 212-219.

  5. Ashwani Kharola, Dr Pravin Patil (2014). “A Fuzzy Logic Controller for Stabilization and Control of Double Inverted Pendulum (DIP) using different Membership functions (MF‟s)”. International Journal of Advanced Modeling and Optimization, 16(3):547-558, ISSN: 1841-4311.

  6. Ashwani Kharola, Dr SB Singh (2014). “Development of Fuzzy Logic Model for Project Management Success (PMS)”. PM World Journal, 3(1):1-11, ISSN:2330-4480

  7. Ashwani Kharola (2014). “A Fuzzy Risk Assessment Model (FRAM) for Risk Management (RM)”. PM World Journal, 3(2):1-10, ISSN:2330-4480

  8. Ashwani Kharola, Punit Gupta (2014). “Stabilization of Inverted Pendulum using Hybrid Fuzzy ANFIS Controller”. Engineering Science Letters, 3(1):1-20, ISSN:2052-5257

  9. Ashwani Kharola, Dr SB Singh (2014). “Application of Fuzzy Logic Reasoning Model for determining Adhesive Strength of thin Film coating”. International Journal of Advances in Material Science and Engineering (IJAMSE), 3(4):13-20, DOI:10.14810/ijamse.2014.3402

  10. Ashwani Kharola, Dr SB Singh (2014). “Development of Fuzzy Failure Mode Effect Analysis (FFMEA) Model for Risk Priority Number (RPN) Analysis”. International Journal of Advanced Modeling and Optimization, 16(1):211-222, ISSN:1841-4311

  11. Ashwani Kharola (2014). “A Fuzzy Logic Model for evaluation of Oil-film pressure in Hydrodynamic Bearing”. International Journal of Recent Advances in Mechanical Engineering (IJMECH), 3(3):91-98, ISSN:2200-5854

  12. Ashwani Kharola (2014). “Development of an Adaptive Neuro Fuzzy Controller for Surface Roughness (SR) Prediction during turning of Mild Steel”. International Journal of Recent advances in Mechanical Engineering (IJMECH), 4(3):73-79, ISSN:2200-5854

  13. Pradeep Kothiyal “Methanol Powered Small Wireless Remote Controlled I.C. Engine Driven Car”. International Journal of Mechanical Engineering and Research. ISSN No. 2249-0019, Volume 3, Number 4 (2013), pp. 317-326

  14. Pradeep Kothiyal “Experimental Investigation Of Machining Parameters Of Cnc Milling On Mrr By Taguchi Method”. International Journal of Applied Engineering Research, ISSN 0973-4562 Vol.7 No.11 (2012)

  15. Pradeep Kothiyal “Investigating Effect of Machining Parameters of CNC Milling on Surface Finish by Taguchi Method”. International Journal on Theoretical and Applied Research in Mechanical Engineering (IJTARME) ISSN : 2319 – 3182, Volume-1, Issue-2, 2012

  16. Pradeep Kothiyal “Investigating effects of process variables on MRR in EDM by using Taguchi parameter design approach”. International Journal on Theoretical and Applied Research in Mechanical Engineering (IJTARME) ISSN : 2319 – 3182, Volume-1, Issue-2, 2012.

  17. Vibhor Sharma, Sashi Bhushan, Ankur Chaudhary, Sachin Kumar, “Privacy of confidential numerical data”, International Journal of Advance Research in computer and communication engineering, vol.3, issue 9, 2014.

  18. Suman Pant, Dr.Yashwant Singh Chauhan and Dr. Priti Dimri ,“Complex Dynamics of Sine Function using Jungck Ishikawa Iteration” International Journal of Computer Applications (IJCA), vol. 94, no. 10, pp. 44-54, 2014.

  19. Suman Pant, Dr.Yashwant Singh Chauhan and Dr.Priti Dimri , “Complex Dynamics Of Jungck Ishikawa Iterates for Hyperbolic Cosine Function ” in INTERNATIONAL JOURNAL OF COMPUTER APPLICATIONS, (IJCA)/ VOL. 101/ NO. 4/PP. 14-23 /SEPTEMBER 2014 ISSN: 0975 – 8887.

  20. Suman Joshi, Dr.Yashwant Singh Chauhan and Dr. Ashish Negi, “New Julia and Mandelbrot Sets for Jungck Ishikawa Iterates”, International Journal of Computer Trends and Technology (IJCTT), vol.9, no.5, pp.209-216, 2014.

  21. Suman Joshi, Dr.Yashwant Singh Chauhan and Dr.Priti Dimri ,“Complex Dynamics of Multibrot Sets for Jungck Ishikawa Iteration” International Journal of Research in Computer Applications and Robotics (IJRCAR), vol. 2, no. 4, pp. 12-22, 2014.

  22. Aditya Vishnoi, Ankit Saxena, Bharat Bhushan Agarwal “Comparison of Various Types of Attacks on Data Transfer in Wireless Sensor Network”, International Journal of Advanced Engineering Research and Science (IJAERS),p59-62, July 2014, Vol 1, Issues 2, ISSN 2349-6495

  23. Rafat Saud Pasha, Ankit Saxena, Jitender Kumar Jindal “Comparison of Various Types of Algorithm for Target Coverage Problem in Wireless Sensor Network”, International Journal of Advanced Engineering (IJAERS), p 46-49, Aug 2014, Vol 1, Issues 3, ISSN 2349-6495

  24. Lokesh Kumar, “A New approach for image processing using Cellular Automata”, International Journal of Advanced Research in Computer & Communication Engineering(IJARCCE), Vol. 3, No. 9, 2014.

  25. Ashutosh Sharma (2014) “Inflation : A monetary Phenomenon” International Research Journal of Social Sciences ISSN 2319–3565 Vol. 2(12), 51-55,December (2014)

  26. Arun bharthi, Israr alam, Sanjeev kumar. “Hop Count and Load Analysis in MANET Using Simulations in MDPF”. International Journal Publication In Academic Education And Research

  27. Mohd Safeer, Gaurav Pathak, Sanjeev Kumar. “A Comparison Review among GPRS, ALARM and ALERT Security Protocols in Mobile Ad Hoc Networks”. International Journal Publication in academic education and research computer science and engineering.

  1. Sanjeev kumar, Jagbir Ahlawat, “Improving Routing Mobility Based on Random Way Point Mobility Model Using FTP Traffic in MANET”. International Journal of Advanced Research in computer science and software engineering.

  2. Sanjeev Kumar, Harjender singh, “An Introduction to data mining The Process of Extracting from Large Data Base”. Soch-Mastnath Journal of Science & Technology

  3. Preeti Raturi, Navin Garg, “Energy Efficient Routing in Mobile Ad-Hoc Network Based on AODV Protocol,” IJERT: ISSN: 2278-0181, Vol.3 Issue 3, March-2014.

Publication Year: 2013

  1. Jeetender Singh Chauhan, Gyan Prabhakar, Sunil Semwal, Atul Kumar Pandey, “Wireless Personal Area Network based Simulation and Design to Control the Speed of Permanent Magnet DC Motor using Zigbee Transceiver Protocol”, International Journal of Computer Applications (IJCA) 69 (2013).

  2. Anamika Chauhan, Sunil Semwal, “Sensor Network based Environmental Monitoring”, International Journal of Engineering 6.3 (2013): 307-314.

  3. Jeetender Singh Chauhan, Sunil Semwal, “Microcontroller Based Speed Control of DC Geared Motor through RS-232 Interface with PC”, International Journal of Engineering Research and Applications (IJERA) ISSN: 2248-9622, Vol. 3, Issue 1, 2013.

  4. N. Negi, Sunil Semwal, “Minutiae Extraction and Pruning Based Fingerprint Identification with Pattern Classification by Radial Basis Function”, International Journal of Engineering Research and Applications, Vol. 3, Issue 4, Jul-Aug 2013, pp.707-712.

  5. Ankit Saxena, “Analysis of the Various Types of Visual Cryptography Schemes”, Journal of Computing technologies (JCT Journal),p 45- 48, April 2013, Vol 2, Issue 4, ISSN 2278-3814.

  6. Ankit Saxena, Abhishek Kumar Mishra”Analysis of the Various Types of Security Attacks in Visual Cryptography”, International Journal of Advance and Innovative Research (IJAIR),p 15-19, May 2013, Vol 2, Issue 5, ISSN 2278-7844

  7. Ankit Saxena, Swapnesh Taterh“Security for wireless network: A challenging task”, International journal of wireless network security, p1-5 vol1 issue 1.

  8. Ankit Saxena, Sandeep Kumar, Swapnesh Tatreh, “Various Techniques Used in Wireless Sensor Networks for Data Transfer”, International Journal of Advanced Engineering, Management and Science (IJAEMS), p-518-521, Vol-5, Issue-8, Aug-2019, ISSN: 2454-1311.

  9. Swati Chauhan, Lokesh Kumar, “Survey Paper on Traffic Flow Control using Cellular Automata”, International Journal of IT, Engineering and Applied Sciences Research (IJIEASR), Vol. 2, No. 6, 2013.

  10. Prashant Kumar, Lokesh Kumar, Kapil Kumar, Sachin Kumar, Sohan Lal, “Security Threats to Cloud Computing”, International Journal of IT, Engineering and Applied Sciences Research (IJIEASR), Vol. 2, No. 1, 2013.

  11. Samiksha Bisht, “Performance enhancement for energy efficient alternative least square based opportunistic routing (ALSOR) protocol in wireless sensor network” International journal of engg and technology”.

  12. Sandeep Kumar, Anuj Kumar singh, Vandana Bansala, “FTP SERVLET”, Journal of Information Engineering and Applications (IISTE), 2012, ISSN -2222-1719

  13. Sandeep Kumar, Pramod Kumar, “Detecting the Packet Lost Information in AODV using confirmation code concept in MANETS”, International Journal of Reseach Fellow for engineering ISSN- 2320-7396

  14. Sandeep kumar Sandeep kumar Singla,“Implementation and Comparative Study of Mesh AODV and Mesh DSR”, ISSN 2320-7396

  15. Vishant Kumar, Rajkumar Singh Rathore,”A Review on Natural Language Processing” International Journal of Engineering Development and Research,Vol.4,Issue3.ISSN: 2321-9939.

  16. Mr. Ramnarayan, Mr. Vashu kumar, Mr. Vipin Kumar “A new generation wireless mobile network -5G”, in International Journal of Computer Applications, volume 69 May-2013 Edition.

  17. Mr. Yogesh, Mr. Ramnarayan, “Challenges for Distance Education Learning” In International journal of engineering management and research(IJEMR), Volume-3, Issue-2, April 2013.

  18. Aman Kumar, “Partial Replacement Of Cement With Fly Ash And Cow Dung Ash By Using Quarry Dust As Fine Aggregate” International Journal of Engineering and Science Invention, IJESI-ISSN:2319-6734: 2319-6726.

Publication Year: 2012

  1. Jeetender Singh Chauhan, Rajesh Singh, Sunil Semwal, Shashank Mishra, “PWM Based Speed Control of DC Geared Motor Using 802.15.4 LAN Standard Protocol”, IJECT Vol. 3, Issue 4, Oct – Dec 2012.

  2. Kaushik Rd, Malik R, Kumar T, Singh P. Manganese (Ii)-Catalysed Periodate Oxidation Of 2-Amino-M-Xylene. A Kinetic-Mechanistic Study. Oxidation Communications. 2012 Jan 1;35 (2):316-26.

  3. Kaushik Rd, Kumar A, Kumar T, Singh P. Manganese (Ii) Catalyzed Periodate Oxidation Of P-Toluidine: A Kinetic And Mechanistic Study. Reaction Kinetics, Mechanisms and Catalysis. 2010 Oct 1;101 (1):13-23.

Publication Year: 2011

  1. Manoj Badoni, Sunil Semwal, Discrete Distance and Water Pit Indicator in Electronics Travel Aid for Blind, International journal of Advance Science and Technology (IJAST), Vol. 34, Oct – Nov, 2011, ISSN:2005-4238, IJAST. Indexed by: EBSCO, ULRICH, DOAJ, Open J-Gate.

  2. Sunil Semwal, Aruna Tyagi, The Effects Of UWB Interference In The UMTS Radio Link”, IJSTM Vol. 2, Issue 2, April 2011, PP – 64-66. ISSN: 2229-6646 (online) IJSTM Indexed by: ULRICH, DOAJ, Open J-Gate.

National Journal Publications

  1. Economics of Poplar based Agroforestry Models Adopted by the Farmers in Haridwar, Uttarakhand. Indian journal of Ecology 44(6): 804-811. NAAS score 4.96.

  2. Comparison of Economics of Poplar-Fodder Crop-Based Agroforestry under Boundary and Block Plantation in Haridwar, North India. Indian journal of Economics and Development 14(1a): 422-426. NAAS score 4.86.

  3. Chi2 analysis of economic factors in agroforestry adoption: Which economic factors influence farmers and which do not? Agriculture Update 12(3): 338-346. NAAS score 4.39.

  4. Adoption of Agroforestry Practices: Chi Function Approach in Determining Influence of Individual and Social Factors on Farmers’ Decision to Adopt or not to Adopt Agroforestry. Indian Forester 144(7):646-652. NAAS score 4.38.

  5. Grewia optiva (Drumm. Ex Burr) – A Multi-Purpose Tree under Agroforestry in Sub–Tropical Region of Western Himalaya. Journal of Tree Science, 37 (2):36-44

International Conference Publications

Publication Year: 2020

  1. Diwaker Pant, P.S. Chauhan, S.K. Soni, Sanjeev Naithani, “Channel Capacity Analysis of Wireless System under ORA scheme over kappa − μ/Inverse Gamma and eta− μ/ Inverse Gamma Composite Fading Models”, International Conference in Electrical and Electronics Engineering (ICEEE 2020), at Madan Mohan Malviya University of Technology, Gorakhpur, 14th– 15th February, 2020. (Accepted).

  2. Sandeep Chand Kumain, Raj Singh, Kamal Kumar “A  Land Use Land Cover Classification Model Using Deep CNN” , International Conference on Innovative Engineering Design – 2020 (ICOIED-2020) ( Accepted)

Publication Year: 2019

  1. S. Negi, P. Mittal, B. Kumar, A. Jain, “Effect of Thickness of Double Hole Block Layers on Performance of OLED: An Analysis”, International Conference on Signal Processing, VLSI and Communication (ICSPVCE-2019), at Delhi Technological University, 28th-30th March, 2019. (Accepted, to be available online at IEEE Explore) (SCOPUS).

  2. S Kapoor, M Chaturvedi “Comparative analysis of FOPID and classical controller performance for an Industrial MIMO process” International Conference on Computational Intelligence and Communication Technology(CICT ) ,2019.

  3. N. Agrawal, S. Johari, “A Survey on Content-Based Crawling for Deep and Surface Web”, 2019 Fifth International Conference on Image Information Processing (ICIIP -2019). (IEEE) (Accepted & Presented for publication).

  4. Abhay Kandpal, “Modelling of permeability and clogging retention in pervious concrete pavement” in the International Conference on Emergent Research in Mathematics and Engineering, May 17-18, 2019 at NIT Agartala, Tripura.

  5. Ashish Kumar, Preeti Kumari, Rohin Sharma, “Effect of nano-silica on self compacting concrete as partial replacement of cement” in the International Conference on Experimentation and Progression in Engineering, Research and Technology, November 15-16,2019 at LPU Punjab.

  6. Mr. Kailash Chand Boori, Md. Salim Ahmad, Sanjeev Kumar, “Cloud Computing Adoption & Implementation: Challenges and Possibilities in Developing Countries.” Conference on Quality Assurance in Higher Education: Practices and Issues.

  7. Sandeep Chand Kumain, Kamal Kumar “VBNC: A Voting based noise classification framework using deep CNN”, International Conference on Deep Learning, Artificial Intelligence and Robotics, (ICDLAIR) 2019. (Presented)

  8. Daud Ibrahim Dewan, Sandeep Chand Kumain, Kamal Kumar “Smart multipurpose robotic car”, International Conference on Deep Learning, Artificial Intelligence and Robotics, (ICDLAIR) 2019. (Presented)

  9. Sandeep Chand Kumain, Kiran Kumain, Kamal Kumar “ Introducing speckle noise data-set and a deep learning based model for speckle noise level identification” Fifth International conference on Advances in Computing, Communication And Automation. (ICACCA 2019). (Presented)

  10. Sandeep Chand Kumain, Kamal Kumar “A Novel Filter for the Detection of Object Boundary and Edges in Noisy and Non-Noisy Images” 5th International Conference on Next Generation Computing Technologies. (Presented)

  11. Sandeep Chand Kumain, Kamal Kumar “A Quartile Based Novel Approach for the Reduction of Salt and Pepper Noise”. 5th International Conference on Next Generation Computing Technologies. (Presented).

  12. Arun P. Mishra1, Raj Singh2 and Ishwari Datt Rai2 (2019). Forest Characterization at Community Level Using Temporal Sentinel-2 Data in Nandhaur Landscape of Western Himalaya, Uttarakhand, India, accepted paper in 1st International Conservation Conference – 2019 to be held in Dept. of Wildlife Sciences, AMU Aligarh.

Publication Year: 2018

  1. S. Negi, P. Mittal, B. Kumar, “Detection of Ovarian Cancer using Organic Light Emitting Diodes”, IEEE Uttar Pradesh Section International Conference on Electrical, Electronics and Computer Engineering, (UPCON 2018), at Madan Mohan Malviya University of Technology, 2nd-4th Nov., 2018. (Available online at IEEE Explore) (SCOPUS).

  2. R. Rathi, R. Ahmed, S. Negi, V. Panwar, “Performance Analysis of Single and Dual Gate Vertical Channel Organic Thin Film Transistor”, IEEE Uttar Pradesh Section International Conference on Electrical, Electronics and Computer Engineering, (UPCON-2018), at Madan Mohan Malviya University of Technology, 2nd-4th Nov., 2018. (Available online at IEEE Explore) (SCOPUS).

  3. Abhishek Chakravorty, Amit kumar and Vikasdeep juyal, “Fuzzy logic controller based active shunt power filter”, 3rd IEEE International Conference on Engineering Technology (ICETECH), Rathinam Technical Campus, Coimdotore , 30-31 August 2018

  4. Abhishek Chakravorty, K.V singh and Vikas deep juyal, ” Approaches in microbial fuel cell array arrangement for conventional DC battery charger” , 2nd International Conference on Inventive systems and control (ICISC 2018) , Pages-418-22

  5. Amit kumar and Abhishek Chakravorty,“ A 50V multi gate RF LMOS on InGaAs,” 3rd IEEE International Conference on Internet of things: Smart innovations and usages(IOT-SIU) Feb 2018, Pages-1-3

  6. Vikasdeep juyal, Nitin upadhayay, Abhishek Chakravorty ,” Comparative harmonic analysis of diode clamped multi level inverter” , 3rd IEEE International Conference on Internet of things: Smart innovations and usages(IOT-SIU) Feb 2018, Pages-1-6.

  7. P. Kholia, M. Chaturvedi, P.K Juneja, S. Kapoor “Effect of Padè First order Delay Approximation On Controller Capability designed for IPDT Process Model” In Power Energy, Environment & Intelligent Control (PIEEC),2018 International Conference on IEEE,2018

  8. Nitin Upadhayay, Abhishek Chakravorty, Vikasdeep juyal , “Virtual instrumentation for power quality measurement ,” 3rd IEEE International Conference on Internet of things: Smart innovations and usages(IOT-SIU) Feb 2018, Pages-1-6.

  9. Abubakar Mohammed, Sanjeev kumar, S.p.singh, “Electronic Commerce: A Means for Business Sustainability”. The 13th Anniversary India-Japan International Conference on Sustainable Development BICON- 2018.

  10. Abubakar Mohammed, Sanjeev kumar, S.p.singh, Kiran Lata, “Adoption of IOT for Enhancing Teaching and Learning in Higher Educational Institutes (HEIs)”. International Conference on Role of ICT in Higher Education & Research.

  11. Kiran Lata, Nishi Fatma, Abubakar mohammed, Sanjeev kumar “Use of ICT for Enhancing Students’ Experience and Engagement in Educational Institutes”. International Conference on Role of ICT in Higher Education & Research

  12. Shrishti Agrahari, Pragya Kamal, Rashmi Mishra, Megha Gupta, “VANET: Characteristics, Applications, Attacks, Challenges and Security Issues” International Conference on Advances in Computational Techniques and Research Practices (ICACTRP 2018), Noida Institute of Engineering & Technology, Greater Noida.Vol. 2,pp 15-18.(In communication with Journal International Journal of Advanced Research in Computer and Communication Engineering)

  13. Sandeep Chand Kumain, Maheep Singh, Krishan Kumar and Navjot Singh “An efficient Gaussian Noise Reduction Technique for Noisy Images using optimized filter approach”. First International Conference on Secure Cyber Computing and Communications (ICSCCC 2018).

Publication Year: 2017

  1. Diwaker Pant, P. Dhuliya, Sandeep Verma, “A Study on Disaster Detection and Management using WSN in Himalayan Region of Uttarakhand”, 3rd IEEE International Conference on Advances in Computing, Communication, & Automation (ICACCA), Tula’s Institute, Dehradun, 15-16 September 2017.

  2. K. Kukreti, A. Rathod, S. Negi, V. Chamoli, “Comparative analysis of different structures of photovoltaic cell based on organic materials”, In IEEE International Conference on Emerging Trends in Computing and Communication Technologies (ICETCCT-2017), at Graphic Era Hill University, 17th-18th Nov., 2017. (Available online at IEEE Explore) (SCOPUS).

  3. Vibhor Sharma, Sachin Kumar and Shashi Bhushan, “An overview of data redundancy reduction schemes in WSN”, 2017, 3rd International Conference on Advance in Computing, Communication and Automation (ICCACCA), pp- 1-8.

  4. Suman Pant ,Dr. Yashwant S. Chauhan, Krishna Kumar Singh, Dr. J. N. Singh ,“Comparative Study of Rate of Convergence & Complex Dynamics of Trigonometric Functions Using Jungck Ishikawa Iteration Scheme”,“INTERNATIONAL CONFERENCE ON COMPUTING COMMUNICATION AND AUTOMATION (ICCCA2017)”,May2017,pp.202-209,IEEE Publications(Published),DOI: 10.1109/CCAA.2017.822980

  5. Vivek Bhatt, P. Benjwal, M. Joshi, “OTRA Based Second Order Universal Filter and its optimization like Butterworth, Chebyshev and Bessel” Research in Intelligent Computing in Engineering-2017, IEEE.

  6. M. Joshi, Vivek Bhatt, A. Ranjan, P. Benjwal, “Realization of Colpitts Oscillator using second generation current controlled current conveyor” Research in Intelligent Computing in Engineering-2017, IEEE.

  7. Sandeep Gotam, R. Kumar, V. Singh, “A new full-adder design using XNORXOR circuit”, International Conference on Emerging Trends in Computing and Communication Technologies (ICETCCT), 17-18 Nov. 2017, Dehradun, India.

  8. S Kapoor, M Chaturvedi, P.K Juneja. “Design of fractional order PID controller for a SOPDT process model” In Fourth International Conference on Image Information Processing (ICIIP).pp. 215-218, IEEE, 2017.

  9. S Kapoor, M Chaturvedi, P.K Juneja “Design of FOPID controller with various optimization algorithms for a SOPDT model” In Emerging Trends in Computing and Communication Technologies (ICETCCT), International Conference on IEEE,2017.

  10. Nath R., Thakur R., “ZigBee and GSM Based Fault Detection System for Low Tension Pillar”, In: Singh R., Choudhury S., Gehlot A. (eds) Intelligent Communication, Control and Devices. Advances in Intelligent Systems and Computing, vol. 624. Springer, Singapore.

Publication Year: 2016

  1. Diwaker Pant, V. Kumar, P. Dhuliya, T. Lal,Performance analysis of femtocell in macro-cellular environment”, 2016 2nd International Conference on Advances in Computing, Communication, & Automation (ICACCA) (Fall), Bareilly, 2016, pp. 1-4.

  2. V. Kumar, T. Lal, P. Dhuliya, Diwaker Pant, “A study and comparison of different image segmentation algorithms”, 2016 2nd International Conference on Advances in Computing, Communication, & Automation (ICACCA) (Fall), Bareilly, 2016, pp. 1-6.

  3. Diwaker Pant, Piyush Dhuliya, Priyanka Sharma, “Comprehensive analysis of spherical wave propagation in a hilly terrain using uniform theory of diffraction”, 3rdIEEE International Conference on Computing for the Sustainable Global Development (10thINDIACom) March 17-18, 2016.

  4. Sachin Kumar, Sashi Bhushan, Pramod Kumar, Vibhor Sharma, “A new approach towards IoT by using health care IoT and food distribution IoT”, 2016 2nd international conference on advance and computing Communication and Automation (ICACCA), pp- 1-7.

  5. S. Negi, P. Mittal, S. Rawat, “Performance analysis of active matrix organic display using vertical channel organic thin film transistor”, IEEE International Conference on Emerging Trends in Communication Technologies (ICETCT-2016), at Graphic Era University, 18th-19th Nov., 2016. (Available online at IEEE Explore) (SCOPUS).

  6. S. Negi, Y. Pandey, A. K. Baliga, P. Mittal, B. Kumar, “Performance analysis of dual gate organic thin film transistor through analytical modeling”, International Conference on Computing, Communication and Automation (ICCCA-2016), at Galgotia University, 29th-30th April, 2016. (Available online at IEEE Explore) (SCOPUS).

  7. D. Saini, S. Saini, S. Negi,Modelling and comparison of single gate and dual gate organic thin film transistor”, IEEE International Conference on Emerging Trends in Communication Technologies (ICETCT-2016), at Graphic Era University, 18th-19th Nov., 2016. (Available online at IEEE Explore) (SCOPUS).

  8. Y. Pandey, S. Negi, A. K. Baliga, P. Mittal, B. Kumar, “Performance analysis of dual gate OTFT with variation in OSC thickness and channel length”, International Conference on Computing, Communication and Automation (ICCCA-2016), at Galgotia University, 29th-30th April, 2016. (Available online at IEEE Explore) (SCOPUS).

  9. Ashwani Kharola, Dr Pravin Patil (2016). “PID control of Double inverted pendulum (DIP)”. In Proceedings of 6th IEEE- International Conference on Computational Intelligence and Computing (ICCIC), 15-17 Dec 2016, Chennai.

  10. Mr Tushar Gupta “Experimental Detection of Void Percentage in Chicken Feather Fiber Filled Epoxy Based Hybrid Biocomposites”. National Seminar on Fabrication of Advanced Materials and Processing- An Approach Towards Make in India”, At graphic era hill university, dehradun.

  11. Rashmi Mishra, Akhilesh Singh, and Rakesh Kumar, “VANET Security: Issues, Challenges and Solutions” International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT) – 2016 with IEEE catalog “978-1-4673-9939-5/16/$31.00©2016”, Tamilnadu, India, 3-5 March 2016.

  1. Rashmi Mishra, Dayashankar Singh, “Secure MANET Routing: A Review” 2016 International Conference on Innovations in information Embedded and Communication Systems (ICIIECS’16), ISBN: 978-1-4673-8207-6, Tamilnadu, Vol. 2, pp. 316-321.

Publication Year: 2015

  1. A. Verma, D. Punetha, Diwaker Pant, “A Novel Quad Band Compact Meandered PIFA Antenna for GPS, UMTS, WiMAX, HiperLAN/2Applications”, IEEE 2nd International Conference on Advances in Computing and Communication Engineering (ICACCE-15), May 2-3, 2015, pp. 404-408.

  2. S. Negi, A. Rana, A. K. Baliga, P. Mittal, B. Kumar, “Performance analysis of dual gate organic thin film transistor and organic SR latch application”, International Conference on Computing, Communication and Automation (ICCCA-2015), at Galgotia University, 15th-16th May, 2015. (Available online at IEEE Explore) (SCOPUS).

  3. P. Lakhera, S. Negi, A. K. Baliga, P. Mittal, B. Kumar, S. Sundriyal, “Performance analysis of organic transistor using different materials for source and drain electrodes”, 1st International Conference on Next Generation Computing Technology (NGCT-2015), at University of Petroleum and Energy Studies, 4th-5th Sept., 2015. (Available online at IEEE Explore) (SCOPUS).

  4. Ashwani Kharola (2015). “The control of Two-wheeled Inverted Pendulum Robot (TWIPR) using fuzzy logic”. In Proceedings of 5th IEEE- International Conference on Computational Intelligence and Computing (ICCIC), 10-12 Dec 2015, Madurai, Tamil Nadu, 2015.

  5. Brijesh Gangil, Pradeep Kothiyal, Sandeep Kumar, “Experimental investigation of Machining process Parameters in Conventional Turning of Al-7075 on MRR Using Response Surface Methodology” (AIP conference proceeding) proceeding of International Conference on condensed matter & applied physics, 30-31 october, 2015

  6. S. Johari, A. Kumar, P. K. Gupta and R. Malekian, “dDRAID: A technique for capacity and performance enhancement of RAID storage systems,” 2015 Annual IEEE India Conference (INDICON), New Delhi, 2015, pp. 1-6. (IEEE).

  7. S. Johari, A. Kumar and V. K. Sehgal, “Heterogeneous and Hybrid Clustered Topology for Networks-on-Chip,” 2015 7th International Conference on Computational Intelligence, Communication Systems and Networks, Riga, 2015, pp. 183-187. (IEEE)

  8. A. Kumar and S. Johari, “Push notification as a business enhancement technique for e-commerce,” 2015 Third International Conference on Image Information Processing (ICIIP), Waknaghat, 2015, pp. 450-454. (IEEE).

  9. A. Kumar, S. Johari and V. K. Sehgal, “Arbitrated IP Core Based Dynamic Task Mapping Algorithm for Networks-on-Chip,” 2015 7th International Conference on Computational Intelligence, Communication Systems and Networks, Riga, 2015, pp. 188-193. (IEEE)

Publication Year: 2014

  1. Sunil Semwal, G. Shah, R. S. Prasad, Identifying Residential Appliances Using NIALM”, IEEE international conf. PEDES-2014, IIT Bombay, Mumbai, 16-19 Dec 2014.

  2. R. S. Prasad, Sunil Semwal, Multi Point Sensing (MPS): A Solution for Resolving Complexity in NIALM Applications for Indian Domestic Consumers”, IEEE international conf. PEDES-2014, IIT Bombay, Mumbai, 16-19 Dec 2014.

  3. Sunil Semwal, R.S. Prasad, M. Singh, Designing compatible hardware platform for implementation of NIALM”, IEEE International conf. INDIACom 2014, Bharati Vidyapeeth, New Delhi, India, 05-07 March 2014.

  4. N. Kumar, Sandeep Khantwal, A. Bharti, “Overview on Precharge logic theory and circuits”, First international conference on Advances in computing and communication engineering (ICACCE-2014).

  5. R. Kumar, Vimal Kumar, Sandeep Khantwal, “A Review on three input XOR function using minimum number of transistors”, First international conference on Advances in computing and communication engineering (ICACCE-2014).

  6. A. Ranjan, Vivek Bhatt, M. Joshi, “Realization of Third Order Low Pass Filter and its nature like Butterworth, Bessel and Chebyshev using OTRA” International Conference on advances in Computing & Communication Engineering – 2014.

  7. Ashwani Kharola, Dr Pravin Patil (2014). “Control of Double Inverted Pendulum (DIP) using Fuzzy Hybrid Adaptive Neuro Controller”. In Proceedings of 4th IEEE- International Conference on Computational Intelligence and Computing (ICCIC), 18-20 Dec 2014, Coimbatore, Tamil Nadu, pp. 1 – 7

  8. Pradeep Kothiyal, K.K.S Mer, Amit Joshi, Sanjay Singh Samant, “Machining of Titanium grade 5 (Ti-6Al-4V) with WEDM: A review” proceeding of International Conference on Advances in Sustainability of Materials and Environment, 10th,11th April 2014 ISBN 978-81-910747-8-9 pp. 579-584.

  9. S. Johari and A. Kumar, “Algorithmic approach for applying load balancing during task migration in multi-core system,” 2014 International Conference on Parallel, Distributed and Grid Computing, Solan, 2014, pp. 27-32. (IEEE).

  10. A. Kumar, S. Johari and S. Saha, “Reduction in Searching Time of Inverted Index using Bloom Filter,” ERCICA 2014 – Emerging Research in Computing, Information, Communication and Applications, Vol. 1, pp. 239-245, August 2014.

Publication Year: 2013

  1. A. Chauhan, Sunil Semwal, “Artificial Neural Network-based Forest Fire Detection System using Wireless Sensor Network”, IEEE INDICON 2013, Indian Institute of Technology Bombay , Mumbai , India, 13-15 December, 2013.

  2. R. S. Prasad, Sunil Semwal,A Simplified New Procedure for Identification of Applications in Smart Meter Application”, IEEE international systems conference, Orlando, USA, April 15-18, 2013.

  3. Sunil Semwal, D. Joshi, R. S. Prasad, D. Raveendhra, “The practicability of ICA in home appliances load profile separation using current signature: A preliminary study”, Proc. of IEEE Intl. Conf. on Power, Energy and Control (ICPEC), 2013, pp.756-759, 2013. (EI Indexed).

  4. S. K. Soni, B. Bansal, Diwaker Pant, “Frequency Domain Analysis of Multiple Diffractions of Spherical Wave by Rectangular Building in Wireless Channel”, IEEE International Conference on Multimedia Signal Processing and Communication Technologies (IMPACT-2013), November 23-25, 2013 pp. 131-134

  5. Diwaker Pant, A. Gupta, S. Singh, S. B. L. Sachan, “MIMO Channel Modeling Methods: An Overview”, IEEE International Conference on Advance Research in Engineering and Technology (ICARET-2013 at K L University, India), Published in Advances in Engineering and Technology Series, Vol.2, pp. 624-628, (SearchDL ID -03.AETS.2013.2.130), ISBN: 978-90-8427-6-3, IDES.

  6. Abhishek Mittal, Pradeep Rana, Amit Joshi and Pradeep Kothiyal, “Methanol Powered Small Wireless Remote Controlled I.C. Engine Driven Car” presented on International Conference on Advances in Mechanical, Automobile and Aerospace Engineering (AMAAE-2013), 21-22 September, 2013 at J.N.U. New Delhi organised by krishi Sanskriti.

  7. Amit Joshi, Pradeep Kothiyal, Hitesh, “Optimization Of Abrasive Wear Characteristics Of Satellite-6 And Chromium Carbide Based Coating On High Speed Steel Deposited By Detonation Gun Process Using Taguchi Method ” Proceeding of 4th International Conference on Emerging Trends in Engineering & Technology (IETET-2013), 25-27 October, 2013 at GIMT Kurukshetra, pp. 231-237.

  8. Lokesh Kumar, Ankur Choudhary, Sachin Kumar, Neeti Bisht, “Privacy Issues in Cloud Computing for Personal Area Networks”, Proceeding of International Conference on Recent Trends in Computing and Communication Engineering, 2013.

Publication Year: 2012

  1. A. Tyagi, Sunil Semwal, G. Shah, A Review of EEG Sensors Used for Data Acquisition”, National Conference on Future Aspects of Artificial intelligence in Industrial Automation (NCFAAIIA 2012) Proceedings published by International Journal of Computer Applications® (IJCA), ISBN 973-93-80868-23-4.

  2. Amit Joshi, Pradeep Kothiyal, Ruby Pant, “Experimental Investigation of machining parameters of CNC milling on MRR by Taguchi method” Proceeding of 3rd International Conference on Emerging Trends in Engineering & Technology (IETET-2012), 09-11 November, 2012 at GIMT Kurukshetra, pp. 1796-1800.

  3. Amit Joshi, Pradeep Kothiyal, “ Investigating effect of of machining parameters of CNC milling on surface finish by Taguchi method” Presented on International Conference on Mechanical and industrial engineering (ICMIE-2012), 06 JAN, 2013 at Hyderabad organised by ird , published in international journal on theoretical & applied research in mechanical engineering,ISSN: 2319-3182 pp. 60-65.

  4. Amit Joshi, Pradeep Kothiyal, “Investigating effect of process variables on MRR in EDM by Taguchi parameter design approach s” Presented on International Conference on Mechanical and industrial engineering (ICMIE-2012), 06 JAN, 2013 at Hyderabad organised by ird, published in international journal on theoretical & applied research in mechanical engineering, 2319-3182 pp. 54-59.

  5. Mr. Ramnarayan, Mr. Rohit pal, Mr Ankit Goel “A Review of emerging wireless broadband mobile technology-WiMAX” 6th International Conference on Advanced Computing and Communication Technologies sponsored by IEEE Computer Society November-2012

  6. Yuvraj Yadav, Mahjabin, Lokesh Kumar, Sachin Chaudhary and Sumira Malik, “An Overview on Internet of things (IoT) as a Technological boon for Sustained Agriculture Farming”.

Publication Year: 2010

  1. P. KheraA. KumarS. Singh, Sunil Semwal, Reconfigurable Architecture: An Approach To Design Low Power Digital Signal Processor, AIP Conf. Proc. November 6, 2010, Vol1324, pp. 433-437, International Conference On Methods And Models In Science And Technology (ICM2ST-10); doi:10.1063/1.3526252. Indexed by: Scopus, Academic Search Premier, Scitation, Web of Knowledge.

  2. Sunil Semwal, A. Kumar, G. Sachdeva, Direction Recognition Using Microphone Array”, in International Multi-conference on Intelligent Systems & Nanotechnology (IISN-2010), ISTK, Kalawad.

  3. S. Tiwari, H. Sakhya, Sunil Semwal, Scalable Sequential Pattern Mining Algorithm for Sequence of Transaction”, in International Multi-conference on Intelligent Systems & Nanotechnology (IISN-2010), ISTK, Kalawad.

National Conference Publications

  1. Archit Priyadarshi, Deepak Singh, “Soil Stabilization from Dredged Soil of Dal Lake, Srinagar using Lime for Pavement Design” in Indian Conference on Geotechnical and Geo-Environmental Engineering, March 01-02, 2019 at MNNIT Allahabad.

  2. Archit Priyadarshi, Deepak Singh, “Soil Stabilization from Dredged Soil of Dal Lake, Srinagar using Pond for Pavement Design” in Indian Conference on Geotechnical and Geo-Environmental Engineering, March 01-02, 2019 at MNNIT Allahabad.

  3. Khushboo Uniyal, “Pedestrian Behaviors Characteristics During Festival Gatherings and its Compersion with Normal Day Behavior” in the 2nd National Conference on Recent Innovations in Emerging Technology and Science, April 6-7,2018 at JBIT Dehradun.

  4. Dr Brijesh Gangil, Pradeep Kothiyal, Bharat Singh “Shrinkage problem in casting of Aluminium low pressure die wheel and its control: A review” proceeding of Trends and Innovation in Mechanical Engineering, 5th-6th October 2018.

  5. Nanse, J.K Quamara ,G.L Pahuja “Cardinality based redundancy optimization of flow networks” National Conference on Nanoscience and Instrumentaion Technology (NCNIT), NIT Kurukshetra (NCNIT), 2017

  6. Nanse, J.K Quamara ,G.L Pahuja “Constrained Reliability Redundancy Optimization of communication Networks using Hierarchical Indices”, National Conference on Biotechnology and Environment (NCOBE), JMI, New Delhi (NCNE), 2017.

  7. Mr. Ramnarayan, Ms. Sakshi koli, Ms. Sahilja upadhyay“Weather Forecasting System using concept of Soft Computing and neural network” National Conference on “RECENT ADVANCES IN SCIENCE, TECHNOLOGY & MANAGEMENT, 2017.

  8. Mr. Ramnarayan, Ms. Anju devi, Ms. Sakshi koli “Speaker Recognition (HMM/GMM Neural approach) using Matlab” National Conference on “RECENT ADVANCES IN SCIENCE, TECHNOLOGY & MANAGEMENT, 2017.

  9. Mr. Ramnarayan, Ms. Shailja upadhyay, Ms. Sakshi koli “Touch API for touch event generation” National Conference on “RECENT ADVANCES IN SCIENCE, TECHNOLOGY & MANAGEMENT, 2017.

  10. Abhishek Chakravorty & Kanak Bhatt “Multilevel cascaded PI control of Active Shunt power Filter for line harmonics reduction,” National conference (RTMT 2015) at DBIT Saharanpur, April 2015.

  11. Rajput, G., Pandey, I. P., Rawat, T. and Joshi, G. “A study on extraction characterisation and modification of caster seed oil”. Universities Journal of Phytochemistry and Ayurvedic Heights, 2015; Vol. II, No. 19: 27-33.

  12. Gaurav Rajput and I.P. Pandey. “Grafting of Acrylonitrile onto Cassia Angustifolia Seed Gum in Aqueous Medium”. 10th Uttarakhand State Science & Technology Congress 2015-16.

  13. Amit Joshi, Pradeep Kothiyal, Praveen Singh “Modelling MRR in WEDM using RSM ” proceeding of national Conference on Recent Advances in Mechanical Engineering, 8-9 july 2013.

  14. Lokesh Nair, Pradeep Kothiyal, K.K.S Mer, “A Review on Processing techniques of Carbon Nanotubes and Applications” proceeding of national Conference on Recent Advances in Mechanical Engineering, 5th,6th October 2013.

  15. Diwaker Pant, A. Pandey, R. Mehra, “CMOS Implementation of 2:1 Multiplexer”, National conference (ADVICE-12) at NITTTR Chandigarh (India), March 1-2, 2012.

  16. A. Pandey, S. Singh, Diwaker Pant, “Fast and Authenticated Vertical Handovers in Heterogeneous Network by 802.11r”, National Conference at SRM University (India).

  17. A. Pandey, S. Singh, Diwaker Pant, “Overview of Security Management and Enhanced Authentication Protocols in GSM”, National Conference at SRM University (India).

  18. Gaurav Rajput, Anupama Sharma and I. P. Pandey. “Calculation of electronic polarizability of amino acid residues”. 8th National Conference on Thermodynamics of Chemical, Biological and Environmental Systems-2013 (TCBES-13).

  19. Kaushik RD, Kumari R, Kumar T, Singh P. Kinetics And Mechanism Of Periodate Oxidation of N, N-Dimethylaniline And N, N-Diethylaniline. Asian Journal of Chemistry. 2010 Nov 30;22(10):7959.

  20. Kaushik, R.D., Kumar, A., Kumar, T. Et Al. Manganese (II) Catalyzed Periodate Oxidation Of P-Toluidine: A Kinetic And Mechanistic Study. Reac Kinet Mech Cat 101, 13–23 (2010) Doi:10.1007/S11144-010-0214-Y

  21. P. Singh, T. Kumar, R. Malik, R.D. Kaushik. Kinetics And Mechanism Of Manganese(Ii) Catalysed Periodate Oxidation of O-Toluidine In Acetone-Water Medium, Journal Of Indian Council of Chemists Vol.28,(P,No.30-36)

  22. P. Singh, T. Kumar, R. Malik, R.D. Kaushik. Periodate Oxidation Of N, N-Dimethyleaniline And N,N- Diethyleaniline Asian J. of Chem, Volume 22 (2010).

  23. Ram Narayan, Sakshi koli , Shailja Upadhyay “A Review on Weather Forecasting System using concept of Soft Computing and neural network” , National Conference On Recent Advance in Science , Technology & Management ,2017.

  24. Rashmi Mishra, Dayashankar Singh, “Survey Reflecting Changing Trends in Secure MANET Routing Protocols” Proceedings of the National Conference on Advanced Computational Science and Technology (NCACT-2016), Dept. Of CSE, Madan Mohan Malaviya University of Technology, Gorakhpur during March 4-5, 2016. Pp. 69-76.

  1. Sweat Singh, Rashmi Mishra, Akhilesh Singh, “Lying to machine: ARP Poisoning”, Proceedings of National Conference on Contemporary Computing and Informatics (NCCI-2015), Dept. Of CSE, Madan Mohan Malaviya University of Technology, Gorakhpur, ISBN No. of Proceedings -978-93-84224-25-7.

  2. Akhilesh Singh, Sweta Singh, Rashmi Mishra, “Prank Calls: Vishing Attack”, Proceedings of National Conference on Contemporary Computing and Informatics (NCCI-2015), Dept. Of CSE, Madan Mohan Malaviya University of Technology, Gorakhpur, ISBN No. of Proceedings -978-93-84224-25-7.

  3. Rashmi Mishra, Akhilesh Singh, Sweta Singh, Dayashankar Singh, “Session Seizure: HIJACKING”, Proceedings of National Conference on Contemporary Computing and Informatics (NCCI-2015), Dept. Of CSE, Madan Mohan Malaviya University of Technology, Gorakhpur, ISBN No. of Proceedings -978-93-84224-25-7.

  4. Rashmi Mishra, Akhilesh Singh, Sweta Singh, Dayashankar Singh, “Session Seizure: HIJACKING”, Proceedings of National Conference on Contemporary Computing and Informatics (NCCI-2015), Dept. Of CSE, Madan Mohan Malaviya University of Technology, Gorakhpur, ISBN No. of Proceedings -978-93-84224-25-7.

  5. Sanjeev Kumar, Rajesh Verma “A Simulation Based Analysis of Reactive and Proactive Routing Protocols in MANET: Effects of Mobility Model Using OPNET” National Conference on Advance Computing & Communication for Technology.

Book Chapters

Publication Year: 2017

  1. S. Negi, P. Mittal, B. Kumar, “Performance analysis of OLED with hole block layer and impact of multiple hole block layer”, Book Title: VLSI Design and Test, Book Series: CCIS, Communication in Computer and Information Science, vol. 711, 2017, Publisher: Springer Singapore (Scopus Indexed).

  2. S. Negi, P. Mittal, B. Kumar, “Performance analysis of double block layer OLED and variation in ratio of double block layer”, Book Title: Intelligent Communication, Book Series: Control and Devices, AISC Book Series, vol. 624, 2017, Publisher: SPRINGER (Scopus Indexed).

  3. S. Nautiyal, S. Negi, P. Mittal, B. Kumar, “Contact resistance dependent OTFT behavior effect of channel length”, Book Title: Intelligent Communication, Control and Devices, Book Series: AISC Book Series, vol. 624, 2017, Publisher: SPRINGER (Scopus Indexed).

Publication Year: 2016

  1. Y. Pandey, S. Negi, B. Kumar, “Dual gate organic inverter circuit behavior analysis based on diode load logic configuration”, Book Title: Intelligent Communication, Control and Devices, Book Series: AISC Book Series, vol. 429, 2016, Publisher: SPRINGER (Scopus Indexed).

Publication Year: 2014

  1. S. Singh, M. Singh, S. Chanana, Sunil Semwal, “Frequency Regulation of Isolated Hybrid Wind/Diesel, Power Generation with Fuel Cell System”, Book Title: Lecture Notes In Electrical Engineering (LNEE), 2014, (ISSN 1876-1100), Publisher: Springer.

  2. M. Singh, Sunil Semwal, S. Kumar, R. S. Prasad, “Residential load signature analysis for their segregation using wavelet – SVM”, Book Title: Lecture notes in electrical engineering(LNEE), 2014, (ISSN1876-1100), Publisher: Springer.

 

Admission Helpline No

Apply Now